Specifications

Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 335
Configuring the connection port
The configuration is made in the " Properties " menu of the network connection.
• Choose 15200 bits/s
• Tick the option "Enable hardware flow control".
Setting up a connection on the PBX
In the " Start " menu, " Parameters " tab, start the connection to the PBX.
• Login: user
• Password: guest
The PPP connection characteristics are displayed using the Windows ipconfig command.
By default, the IP addresses 192.168.0.101 and 192.168.0.102 are used for the system
and for the PC.
Note:
For a stand-alone PC and if the PBX IP address is used, IP routing uses the PPP
connection as available route to access the IP address provided.
If the PC is located on the same network as the PBX, it is necessary to disconnect the PC
from the network to force routing via PPP connection. In this case, it is more practical to
use the IP address " 192.168.0.101 " of the PPP interface.