Installation manual

IM2803MG.DOC., DIR. 912802 IM2803 Shadin Avionics
INSTALLATION MANUAL
D
IGIDATA
Rev: M
P/N 912802-A, 912802-03A, 912802-03A-G
Page: 1-2
1.3 System Configuration
The DigiData is a panel mounted indicator, which communicates with a navigational receiver via
the serial port. It is also connected to the pitot and static lines, OAT probe, fuel flow sensors and
the aircraft heading source.
DigiData Navigational
Receiver
STATIC
PITOT
LEFT ENGINE FUEL FLOW
RIGHT ENGINE FUEL FLOW
MAGNETIC HEADING
OAT
SYSTEM CONFIGURATION
1.4 DigiData, Argus Moving Map Configurations.
Shown below is the system configuration that supports output to a Eventide Argus moving map
using the Shadin serial to serial data converter P/N 937000-03. The fuel and airdata are displayed
on the Eventide-Argus moving map. Consult Drawing numbers 4070-005 and 4028-A20
contained in section 10.
Navigational
Receiver
Shadin
DigiData
RS-232 or RS422
Shadin
Converter
P/N 937000-03
Eventide
Argus
Moving Map
P/N 5000
P/N 7000
RS-232
RS-232 or RS422