Installation manual

FILE: IM2803MG.DOC, DIR: 912802 IM2803 Shadin Avionics
INSTALLATION MANUAL
D
IGIDATA
Rev: M
P/N 912802-A, 912802-03A, 912802-03A-G
Page: v of v
REVISION LOG
REV. DATE APP’D CHANGE
- 10/21/93 RR Release
A 09/09/94 SES Miscellaneous updates
B 08/07/95 KCL Miscellaneous updates
C 05/09/96 KCL Miscellaneous updates
D 08/07/98 KCL Format change, SSEC listing, software configuration update, new installation DWGs
E 06/10/99 EDJ Update Analog K-Factor table, correct SSEC/PSEC list and alphabetize, correct
SSEC/PSEC selection table, insert drawing 4028-716, replace drawings 4028-A29, 4005-
483, 4028-546 and 4028-A23 with current revision. Update descriptions in drawings 4005-
642 and 4028-373. Formatting changes made to manual reflecting current revision.
F 01/31/00 EDJ Add Garmin, FormatG, to page 9.3 Loran Output Type list. Page iv changed due to adding
Ragen Indicator/Transmitter to page 10-26, 4028-A29 installation wiring drawing.
G 09/12/00 KCL Change page iii, 5-2, and 8-1 OAT probe to P/N 681201A-1, changed page 2-1 PALT to
50000 ft, change page 3-1 environmental categories, replace pages 10-10 and 10-11.
H 09/12/00 KCL Update: Title page, pages i through v, page 5-1, page 5-4 and Drawing No 4028-A19.
J 04/18/03 EDJ Revised Section 9 to include Configuration Selection procedure and Tables. OAT probe
correction code selection was added. Updated Section 2.2.
K 02/25/05 ZK Changed Company name. Updated Installation Dwg Section 10.
L 01/05/06 CB Updated Company Logo, Section 5.2, Section 2.2.
M 05/20/08 ZK Added A to Digidata part numbers due to software change and RTCA/DO-178B Level D.
Changed Page 2-1.
The information in this manual is subject to change without notification. To ensure complete and current
updates, note the Revision Log above and call Technical Support for updated information.