Installation manual

FILE: IM2803MG.DOC, DIR: 912802 IM2803 Shadin Avionics

INSTALLATION MANUAL

IGIDATA

Rev: M

P/N 912802-A, 912802-03A, 912802-03A-G

Page: ii of v

SECTION

DESCRIPTION PAGE

NO.

5.0 INSTALLATION PROCEDURE 5-1

5.1 General 5-1

5.2 DigiData Panel Location Selection 5-1

5.3 Mounting the DigiData 5-1

5.4 Mounting the OAT Probe 5-2

5.5 Connection to the Fuel Flow Sensor 5-3

5.6 Connection to the Heading Source 5-4

5.7 Connection to the Pitot and Static Lines 5-5

5.8 Connection to the Navigation Management System 5-6

5.9 Connection to the DC Power Buss 5-6

5.10 Post Installation Checkout 5-6

6.0 BASIC OPERATING INSTRUCTIONS 6-1

7.0 INITIALIZATION 7-1

8.0 MAJOR COMPONENTS OF THE SYSTEM 8-1

9.0 CONFIGURING THE DIGIDATA 9-1

9.1 Configuring Manually (Loop-back) 9-1

Table of Configuration Selections 9-2

Table 1. Analog K-Factor Settings Table 9-3

Table 2. SSEC and PSEC Selections 9-4

Table 3. Navigational Receiver Types 9-5