Operation Manual

8
20317510en_bat_a0
Using the extended-feature functions
Call back
You request a call back from an internal subscriber whose line is busy or who is not
answering.
Press the Foxkey under "Call_back"; you will
hear the confirmation tone. After replacing the
handset, you will see "Call expected" on the dis-
play and the number/name of the corresponding
subscriber. You can press the Foxkey under
"Reset" to cancel the requested call back.
Note Only one call back can be activated at a time.
Call waiting
To alert a busy subscriber to your call by using the "Call_waiting" tone and an
appropriate display.
Press the Foxkey under "Call_waiting".
Note If the called party rejects your call, the connection will be disconnected.
Paging
1)
To page a person directly or after trying to telephone him.
Press the MENU key repeatedly until "Page"
appears. Press the Foxkey at this position and
enter the number of the person sought.
Confirm with "Ok".
Call–back
Reset
C–wait
MENU
☛
Page
Ok
1) Depends on the PBX-type