Operation Manual

20317510en_bat_a0

English

Using the extended-feature functions

Enquiry call

You are conversing with one party and wish to make a brief call to another party while

holding the existing connection.

Enter the number for the enquiry, press the

Foxkey under "Enquiry_call".

At the end of your enquiry call press the END

key.

Note If you press the wrong key or replace the handset after terminating the

enquiry call, a continuos ringing tone is emitted for around 10 seconds to remind

you that the first call is still connected. If you lift the handset during this time you

will return to the first call.

Brokering

To switch between the first call and the enquiry call.

Press the Foxkey under "2nd conversation".

Transferring the call

After initiating an enquiry call you wish to connect the two call partners.

Replace the handset.

Conference

After initiating an enquiry call you wish to set up a conference together with your original

call partner.

Press first the MENU key and then the Foxkey

under "Conference".

Note Don’t worry! When you are setting up a conference call, none of your call part-

ners will be disconnected. The connections will only be disconnected if the END

key is pressed or if the handset is replaced!

Enquiry–call

☛

END

2nd–conversation

Conference