User guide
Table Of Contents
- 1 AMC Portal for handling Installation, Configuration and Licenses
- 2 AMC License Rules
- 3 Login to AMC Portal
- 4 The AMC provisioning portal
- 5 Create AMC user account
- 6 Configure AMC user account
- 7 Provisioning of Client SW, configuration and licenses
- 8 Filter view
- 9 Feature list administration
- 10 Mobile LCR feature (and exception number handling)
- 11 AMC portal administration account
9
mobile phone number in international format and the AMC user account key. The AMC application will download AMC configuration
and License (the License needs to be created at AMC portal otherwise AMC will only download the configuration)
Type of configuration field is only for the AMC (Single Mode) version. Default value this is set to configure AMC users via SMS. The
option “Download” will send an AMC users Account key via SMS or e-mail to the user.
In the Mobile phone platform select from the list the Operating System that the phone uses.
You also need to check AMC or AMC+ to state what type of AMC application (client) that shall be downloaded to the mobile phone.
AMC = Solution with only the AMC client, single mode
AMC+ = Solution with both AMC+ client and AMC controller, dual mode
Then press Save, and the user configuration window pops up.
Figure 6: Assign licenses to the user account, AMC+ (dual mode) shown above
You then select in the Feature licenses list what licenses/features that the user shall have access to. The available, clickable, licenses
are based on what has originally been ordered for the total account and the chosen AMC application solution for the user, single or
dual mode.
For information on the licenses see respective license chapter below.
When the licenses are checked you need to press Save so the configuration page is updated with the respective parameters for each
license. The configuration will only show parameters that are valid for the specific user, based on what licenses are chosen.
Note:
It is not possible to change Mobile phone (GSM) number or Mobile phone platform after you have created/sent the AMC license to the
user.
A user can change to any phone, regardless of brand and type, without the need of a new license as long as the operating system on
the phone is the same. E.g. if you have a Nokia phone with Symbian 3 OS you can use the same license for a Samsung phone as long
as it has Symbian 3 as OS.
After activating the AMC application on the phone it will work for 30 days (trial period) before there is a need to have the real license
installed.