User`s guide

Supplementary features
eud-1290/1.0 – R1.0 – 01.2011 59
Silent intrusion
Silent intrusion is a variant of the Intrusion function and is used mainly in call centres.
Another user can intrude on your active call and listen in to your conversation without
you and your call party noticing. Unlike Intrusion you will receive neither a visual nor
an acoustic signal.
This means you cannot reject Silent intrusion. The third user's microphone remains
switched off. He can however intrude on the call at any time by enabling his micro-
phone or pressing the Intrusion function key.
Your system administrator can allocate this function to a configurable key.
Enable room monitor-
ing
Activating room monitoring:
Scroll to Enable room monitoring and press the Select softkey.
➔You hear the acknowledgement tone and the display shows the destination
number after 10 seconds. The symbol shows when the microphone for
room monitoring is activated.
Enable room monitor-
ing
To deactivate room monitoring:
Press the Reset softkey.
Or:
Scroll to Enable room monitoring and press the Select softkey.
➔Room monitoring is now deactivated.
Notes:
• Silent intrusion has to be enabled. Contact your system administrator for more
information.
• Silent intrusion may infringe on your national data protection provisions or be
permitted only under certain circumstances.
• If you intend to use this function notify your call party in advance.
1. Enter the call number of the user you want.
2. Once the busy tone sounds, press key 4.
➔Silent intrusion is activated.