User guide

8
2 Connect the telephone cords.
Refer to the illustration of
the telephone jacks on the
right when following these
steps.
You may find it helpful to
refer to one of the following
illustrations:
An illustration
of a one telephone-cord
setup
on page 10 or An illustration of a two
telephone-cord setup
on page 11.
If both telephone lines are on one telephone cord,
plug one end of the telephone cord into the 1 jack,
and plug the other end into the wall jack.
If your telephone lines are on separate telephone
cords, plug one telephone cord into the 1 jack, and
plug the other telephone cord into the 2 jack. Plug
the other ends of the telephone cords into your wall
jacks.
Attach one end of the coiled handset cord to the
handset and the other end to the handset jack. Then
route the handset cord along the groove leading off
the side of the telephone as shown in the illustration
on page 7.
3 Insert the hooked end of the thick USB cord into the
USB jack on the back of the telephone. Insert the
straight end into the jack at the back of your
computer.
continued...