User guide

Clearing the Check line cord message

There may be times when Check line cord appears on

the telephone display and you want to clear this message.

For example, you may have only one line cord connected.

You can remove the Check line cord message from the

telephone display by turning off the Check Line Cord

option for the line that is not connected.

To enable or disable the check line cord message:

1 Press the Options key.

2 Enter your Options password if required. Refer to Set-

ting the Options password using the telephone

on page 87 for more information.

3 Use

ª to scroll to option number 13 or press

⁄ ‹.

4 Press •.

5 Press ¬ of the line the Check line cord mes-

sage applies to.

6 Press

• to enable the Check line cord message. Press

to disable the Check line cord message.

7 Press ®.