User guide

341
Editing in the Callers List
If you call a number from the Callers List and you don’t
get connected, you may have to edit the number (for
example, the number may be long distance and you may
have to add “1” in front of it).
To edit a number in the Callers List:
1 Press
≈.
2 Press ¬.
Note: This step is not necessary if the Callers List
Mode is set to the “Combined” option. For more
information about the Callers List Mode, refer to Set-
ting the Callers List mode on page 338.
3 Find the item you want to edit.
4 Press any key on the dialpad to begin editing. This may
be required if you have tried to dial the number and
there is no connection.
5 To add digits, use the dialpad. To erase one digit to the
right of the cursor, press
‘. To erase one digit
to the left of the cursor, press
“.
Caution: The Callers List does not save changes. If you
plan to call the number again, copy it to the Directory
or a memory key. For more information, refer to
Copying a contact from the Callers List, Redial
List or a memory key to the Directory on page 141
or Copying a contact from the Callers or Redial
List to a memory key on page 148
6 To dial the edited number, lift the handset or press
©, ∂, or ¬.
continued...