User guide

155
Specifying Ring Configuration properties for
contacts stored in memory keys
You can specify Ring Configuration features for memory
key contacts just as you can for the contacts stored in the
Quick Dials folder. These features are described below.
Always Ring – When you select this option, you are
overriding the Do Not Disturb setting for the contact
stored in the memory key. (When you activate the Do Not
Disturb (DND) feature, the telephone does not ring when
you receive a call.) For more information, refer to
Overriding DND for some contacts on page 329.
Never Ring – When you select this option for a contact
stored in a memory key, the telephone does not ring
when this contact calls. (Note that if you haven’t turned
on the Suppress First Ring option, the telephone will ring
once.) For more information, refer to Screening your
telephone calls on page 312.
Special Ring – When you select a special ring for a
contact stored in a memory key, you will hear a telephone
ring that is different from the normal ring when this
contact calls. (Note that if you haven’t turned on the
Suppress First Ring option, the telephone will ring once
normally.) For more information, refer to Screening your
telephone calls on page 312.
Pager Notification – When you select this option for a
memory key contact, the pager feature will work for this
contact even if you disable pager notification on both of
your telephone lines. For more information, refer to
Pager Notification for Quick Dial and memory key
contacts on page 310.
continued...