User guide
Table Of Contents
- Software License Agreement
- Table of Contents
- About This Guide
- Introduction
- Getting Started
- IP Phone Keys and Key Descriptions
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Line Key
- Creating a Speeddial Key
- Speeddial Prefix
- Press-and-Hold to Create a Speeddial (applicable to programmable keys and keypad keys)
- Creating a Speeddial Using the Speed Dial Edit Option
- Creating a Speeddial Key Using the Save Key
- Creating a Speeddial Using a Programmable Key
- Creating Speeddial Key Using “Keypad Speeddial” in the Aastra Web UI
- Saving an Entry from the Redial, Callers, or Directory Lists to a Speeddial Key
- Editing Speeddial Keys
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF List Key
- Flash Key
- Automatic Call Distribution (ACD) Key (for Sylantro Servers)
- Directed Call Pickup/Group Call Pickup Keys (for Sylantro Servers)
- XML Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return (lcr) Key (for Sylantro Servers)
- Call Forward Key
- BLF/Xfer
- Speeddial/Xfer
- Speeddial/Conf
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key (Sends the RTP Stream)
- None Key
- Deleting a Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Directory List
- Callers List
- Account Configuration (DND and Call Forwarding)
- Missed Calls Indicator
- Voicemail
- Additional Features
- Star Codes
- Suppress DTMF Playback
- Display DTMF Digits
- Enable/Disable Call Waiting
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Incoming Call Interrupts Dialing
- Switch UI Focus to Ringing Line
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- UPnP Mapping Lines (for remote phones)
- Message Waiting Indicator
- Incoming Intercom Call Features
- Using Redial Key for “Last Number Redial”
- Group RTP Paging (receives RTP streams)
- Use LLDP ELIN
- Shared Call Appearance (SCA) Call Bridging
- Available Features Enabled by Administrators
- Outgoing Intercom Calls
- Missed Call Summary Subscription
- Customizable Callers List Key
- Autodial (Hotline and Warmline)
- Centralized Conferencing
- Answer and Ignore Keys for XML Applications
- Playing a WAV File On Your Phone
- Using the Keypad During Active XML Applications
- Key Redirection
- XML Applications and Off-Hook Interaction
- XML Override for a Locked Phone
- RTP Recording and Simultaneous Playing
- “Hold” Feature Enhancement (for Broadsoft Servers)
- Configurable Save and Delete Keys
- Authentication Support for HTTP/HTTPS Download Methods Used with Broadsoft Client Management System (CMS)
- Diverting Calls from Your Phone
- Display of Call Destination Information
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new Voice Mail Message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the “No Service” message?
- How do I change my user password?
- Why does my phone display "Bad Encrypted Config"?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Appendix A - Time Zone Codes
- Index
Model 9143i IP Phone User Guide 41
Customizing Your Phone
User Password
This category allows you to change the user password for your phone. Changing your password
ensures that only you can alter your phone settings, and helps keep your system secure. You can
change your user password using the IP Phone UI or the Aastra Web UI.
Setting a User Password
1. Press on the phone to enter the Options List.
2. Select User Password and press Enter
.
3. At the "Current Password" prompt, enter the current user password and press Enter..
4. At the "New Password" prompt, enter the new user password and press Enter.
5. At the "Enter Again" promot, re-enter the new user password and press Enter.
A message, "Password Changed" displays on the screen.
1. Click on Operation->User Password.
2. In the "Current Password" field, enter the current user password.
If you change the password Then you need to:
using the IP Phone UI, use that new password to log into
the Aastra Web UI.
using the Aastra Web UI, use that new password when
changing the user password via the
IP Phone UI.
Note: Valid values when creating or changing a password are 0 to 4294967295
(integers only; symbols and alpha characters are not allowed). Default password
is an empty string "" (field is blank).
IP Phone UI
Aastra Web UI
Note: By default, the user name is “user” (all lowercase) and the password field
is left blank.
Options