User guide
Table Of Contents
- Software License Agreement
- Table of Contents
- About This Guide
- Introduction
- Getting Started
- IP Phone Keys and Key Descriptions
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Line Key
- Creating a Speeddial Key
- Speeddial Prefix
- Press-and-Hold to Create a Speeddial (applicable to programmable keys and keypad keys)
- Creating a Speeddial Using the Speed Dial Edit Option
- Creating a Speeddial Key Using the Save Key
- Creating a Speeddial Using a Programmable Key
- Creating Speeddial Key Using “Keypad Speeddial” in the Aastra Web UI
- Saving an Entry from the Redial, Callers, or Directory Lists to a Speeddial Key
- Editing Speeddial Keys
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF List Key
- Flash Key
- Automatic Call Distribution (ACD) Key (for Sylantro Servers)
- Directed Call Pickup/Group Call Pickup Keys (for Sylantro Servers)
- XML Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return (lcr) Key (for Sylantro Servers)
- Call Forward Key
- BLF/Xfer
- Speeddial/Xfer
- Speeddial/Conf
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key (Sends the RTP Stream)
- None Key
- Deleting a Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Directory List
- Callers List
- Account Configuration (DND and Call Forwarding)
- Missed Calls Indicator
- Voicemail
- Additional Features
- Star Codes
- Suppress DTMF Playback
- Display DTMF Digits
- Enable/Disable Call Waiting
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Incoming Call Interrupts Dialing
- Switch UI Focus to Ringing Line
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- UPnP Mapping Lines (for remote phones)
- Message Waiting Indicator
- Incoming Intercom Call Features
- Using Redial Key for “Last Number Redial”
- Group RTP Paging (receives RTP streams)
- Use LLDP ELIN
- Shared Call Appearance (SCA) Call Bridging
- Available Features Enabled by Administrators
- Outgoing Intercom Calls
- Missed Call Summary Subscription
- Customizable Callers List Key
- Autodial (Hotline and Warmline)
- Centralized Conferencing
- Answer and Ignore Keys for XML Applications
- Playing a WAV File On Your Phone
- Using the Keypad During Active XML Applications
- Key Redirection
- XML Applications and Off-Hook Interaction
- XML Override for a Locked Phone
- RTP Recording and Simultaneous Playing
- “Hold” Feature Enhancement (for Broadsoft Servers)
- Configurable Save and Delete Keys
- Authentication Support for HTTP/HTTPS Download Methods Used with Broadsoft Client Management System (CMS)
- Diverting Calls from Your Phone
- Display of Call Destination Information
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new Voice Mail Message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the “No Service” message?
- How do I change my user password?
- Why does my phone display "Bad Encrypted Config"?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Appendix A - Time Zone Codes
- Index
Model 9143i IP Phone User Guide 133
Managing Calls
DND in Custom Mode
1. Press the DND key on the phone. The screen displays a list of the accounts on the phone and
allows you to enable/disable a specific account or all accounts.
2. Use the UP and DOWN arrow keys to scroll through the accounts.
In the above example, Screenname1 and 3 have DND ON as indicated by a check mark (
3).
Screenname2 has DND off as indicated by an X. Items 4 and 5 allow you to disable or enable
DND on all accounts, respectively.
3. Use the CHANGE key to enable or disable DND for a specific account.
4. Use the SET key to enable/disable DND for all accounts.
5. After making the change, press DONE and then Confirm (#) to save the change. Pressing
Cancel (0) cancels the attempted change. The following screen displays after pressing a
DONE key:
Call Forward Account-Based Configuration
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another
destination.
On the 9143i, you can set Call Forward (CFWD) on the phone-side for a specific account or for all
accounts on the phone. You can set three modes for CFWD using the Aastra Web UI at the path,
Basic Settings->Preferences->General->Call Forward Key Mode:
• Account (default)
• Phone
• Custom
CFWD performs according to the mode you set.
DND
Done
1. Screenname1
Change
DND
Done
2. Screenname2
Change
X
DND
Done
3. Screenname3
Change
DND
Done
4. All Off
Set
DND
Done
5. All On
Set
Apply Changes?
0 Cancel
# Confirm