Installation guide

Model 9133i SIP Admin Guide 22
Troubleshooting
How to set the 9133i IP Phone to
factory default?
From the 9133i IP Phone:
1. Press the I button to enter
the Options List.
2. Select 10. Phone Status.
3. Select 5. Factory Default.
4. Enter the administrator password
and press s.
5. Press the 4 key to confirm and
accept the factory default settings
or press r to cancel and return
to the Options List.
How to restart a user’s
password?
If a 9133i IP Phone user has
forgotten the password it must be
reset.
From the web client:
1. Click on the Password sub-
category under the USER main
category.
2. Enter the administrator level user
password in the Current
Password field.
3. Enter the new password for the
user
Tip: The user’s name for whom the
password is being modified is
displayed beside the User
Name field on the current page.
4. Re-enter the password to confirm
the new password.
5. Click on the Set Password button.
The password has been reset.