Installation guide

Model 9133i SIP Admin Guide 18
Setting Parameters – Programmable Key Settings
Setting Parameters – Programmable Key Settings
This section contains the programmable key parameters that can be
configured on the 9133i IP Phone. Keys can be programmed as speed dials or
configured as extra line keys. There are 7 keys that can be configured. These
parameters can be configured either from the Aastra.cfg, the <mac>.cfg file or
the 9133i IP Phone. The most recently updated file will be used on the 9133i
IP Phone when it is restarted. This is typically the <mac>.config file.
Parameter –
prgN type
Configurable through the configuration files
or the 9133i IP Phone
Description The type of programmable key that will be
configured to.
Format Text
Default Value Not Applicable
Range speeddial. N in the prgN type ranges from 1 to
7
Example prgkey: speeddial
Parameter –
prgN name
Configurable through the configuration files
or the 9133i IP Phone
Description The text label that should be displayed for
the key.
Format Text
Default Value Not Applicable
Range Sequence of ascii characters. A width less
than 16 characters.
Example prgkey1 label: “Info”
Parameter –
prgkeyN value
Configurable through the configuration files
or the 9133i IP Phone
Description The value is the number to speed dial.
Format Text
Default Value Not Applicable
Range line or speeddial. N in the softkeyN value
ranges from 1 to 7
Example prgkey1 value: 411