Installation guide

13 Model 9133i SIP Admin Guide
Setting Parameters – Time Server Settings
Parameter –
time server3
Configurable through the configuration files
only
Description The tertiary time server's IP address. If the
time server is enabled, and the primary and
secondary time servers are not configured or
cannot be accessed the value for time server3
will be used to request the time from.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example time server3: 192.168.0.5
Parameter –
time format
Configurable through the 9133i's Options
List or the configuration files
Description This parameter changes the time to 12 hour
or 24 hour format. Use “0” for the 12 hour
format and “1” for the 24 hour format.
Format Integer
Default Value 0
Range 0 or 1
Example time format: 0
Parameter –
date format
Configurable through the 9133i's Options
List or the configuration files
Description This parameter allows the user to change the
date to various formats.
Format Integer
Default Value 0
Range 0-7
Following table shows the format for the
corresponding date format values:
0: WWW MMM DD
1: DD-MMM-YY
2: YYYY-MM-DD
3: DD/MM/YYYY
4: DD/MM/YY
5: DD-MM-YY
6: MM/DD/YY
7: MMM DD
Example date format: 7