Installation guide

11 Model 9133i SIP Admin Guide
Setting Parameters – Network Settings
Parameter – tftp server Configurable through the 9133i's Options
List, the Aastra 9133i web client or through
the configuration files
Description The TFTP server’s IP address. If DHCP is
enabled and the DHCP server provides the
information, this field is automatically
populated. Use this parameter to change the
IP address of the TFTP server. This will
become effective after this configuration file
has been downloaded into the phone.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example tftp server: 192.168.0.130
Parameter – sip rtp port Configurable through the configuration files
only
Description Indicates the port through which the RTP
packets will be sent to. The RTP port is used
for sending DTMF tones and for the audio
stream. Your network administrator may
close some ports for security reasons. You
may want to use this parameter to send RTP
data using a different port.
Format Integer
Default Value 3000
Range Not Applicable
Example sip rtp port: 5130