User guide

Aastra Model 9133i IP Phone Features

If DND is set on a softkey, the key switches DND ON and OFF. If the phone shares a line with other

phones, only the phone that has DND configured is affected.

The second line on the menu of the IP phone shows when DND is configured. When a call comes in on the

line, the caller hears a busy signal or recorded message, depending on the server configuration.

2.13 Selecting a Ring Tone

You can configure ring tones and ring tone sets on the IP phone. There are several distinct ring tones that a

user can select from to set on the IP phones. You can enable and disable these ring tones on a global or per-

line basis.

The following table identifies the valid settings and default values for each type of configuration method.

To configure a ring tone using the IP Phone UI

1 Press Options on the phone to enter the Options List.

2 Select Tones.

3 Select Set Ring Tone.

4 Select the type of ring tone (Tone 1 through Tone 5, or Silent).

Table 1. Ring tone settings table

Configuration Method Valid Values Default Value

IP Phone UI Global:

Tone 1

Tone 2

Tone 3

Tone 4

Tone 5

Silent

Global:

Tone 1

Aastra Web UI Global:

Tone 1

Tone 2

Tone 3

Tone 4

Tone 5

Silent

Per-Line:

Global

Tone 1

Tone 2

Tone 3

Tone 4

Tone 5

Silent

Global:

Tone 1

Per-Line:

Global