User guide

Remote-Controlled Functions

3. Enter the PIN of your voicebox.

4. Follow the instructions in the voice menu for all further operating steps.

Note: For detailed information on the use and operation of

the OpenVoice application, please refer to the user guide for

the optional component “OpenVoice 200 – The Voice-Mail

System in the OpenCom 100 and Aastra 800 Communica-

tions Systems”.

10.4 Setting up an Internet Connection from Remote

(ISP Trigger Call)

Z (reserved call no.)

Wait until the connection to the communications system has been established.

You hear a positive acknowledgement tone.

Z (system PIN) * #

If the communications system is connected to the Internet via a dialup con-

nection, a user can initiate from external that the system establishes an Internet

connection (ISP Trigger call). The system is then reachable via the Internet and

enables to set up a connection for a VPN connection via RAS.

Note: This feature is only available on an OpenCom X320

communications system.