User guide

Remote-Controlled Functions
34
Deleting the call forwarding in the exchange is a background function. After you
entered the procedure this process will take time (up to 15 seconds for each line).
Please have patience with this.
The system PIN is issued by the system administrator. It must have been changed
from the factory setting “0000” valid on delivery to another value.
This feature cannot be used with a SIP terminal.
10. Remote-Controlled Functions
The OpenCom 100 / Aastra 800 enables remote-controlled calls and remotely pro-
grammable call forwarding. These features are set up by the system administrator
when he configures the system. To carry out these features the system PIN is
required.
The system PIN is issued by the system administrator, who has to change the
default value “0000” to another value before it is issued.
In addition, all the owners of voiceboxes can, with the corresponding authori-
sation, call their voiceboxes from external telephones. They can remotely access
and edit their messages as well as modify the central settings of their voiceboxes.
10.1 Remote-Controlled Dialling (Call Through)
Without internal number assignment
Z (reserved call no.)
Wait until the connection to the communications system has been established.
You hear a positive acknowledgement tone.
Z (system PIN) *(external access code, e.g. 0)
Z (external call no.) #
With internal number assignment
Z (reserved call no.)
Wait until the connection to the communications system has been established.
You hear a positive acknowledgement tone.
Z (system PIN) *(external access code, e.g. 0)
Z (external call no.) * Z (internal call no.) #