User guide

Forwarding Calls
23
When a terminal is busy, an external call for an MSN configured in the
OpenCom 100 / Aastra 800 is forwarded immediately to the specified external
destination.
After delay (for one MSN)
On:
H*613* Z (MSN) *Z(destination no.) *
Z (period of time in seconds, e. g. 20) #
Off:
H#613* Z (MSN) #
After delay (for several MSNs)
On:
H*613* Z (MSN 1) * Z (MSN 2) *Z(destination no.) *
Z (period of time in seconds, e. g. 20) #
Off:H#613* Z (MSN 1) * Z (MSN 2) #
An external call for an MSN configured in the OpenCom 100 / Aastra 800 is sig-
nalled on the destination terminal and forwarded to the specified external desti-
nation after the specified period of time.
6.6 All Call Forwarding Off
H#2#
If you have programmed several instances of call forwarding, you can deactivate
them all simultaneously with the above procedure.
6.7 Follow Me
You can activate and deactivate immediate internal call forwarding for your own
telephone from any other telephone, providing you have the user PIN for your
own telephone (see page 31). Calls are forwarded to the telephone (destination)
on which you carry out the procedure.
Initiating the function on the destination telephone
H*22* Z (source PIN) *Z(source call no.) #
Calls are immediately forwarded to the other destination, and are not signalled on
your own telephone. On the originally dialled telephone (the source) you will hear
a special dialling tone on lifting the handset.