User guide

6/1553-DBC 433 01 Uen B6 2010-07-09 86
S
ETTINGS
13.4 Language
This section describes how to change language and character set on
your phone.
Note: There are several languages and character sets available for the
phone. They are enabled by the system administrator.
13.4.1 Display Menus
To change the display menu language, do the following:
1. Press .
2. Scroll to Language, and press Select.
3. Select Display Menus and press Select.
The default language is displayed, along with a list of available
languages for the menus.
4. Use the navigation keys to scroll the list and select the desired
language, and press Set.
A confirmation message is displayed.
5. Press Yes to confirm, or No to cancel.
Note: The phone must be registered to the PBX, otherwise it is not
possible to change the language. Also, the selected language
must be available in the PBX.
13.4.2 Keypad Characters
To change the keypad character set, do the following:
1. Press .
2. Scroll to Language, and press Select.
3. Select Keypad Characters, and press Select.
The default character set is displayed, along with a list of available
character sets for the keypad.
4. Use the navigation keys to scroll the list and select the desired
character set, and press Set.
A confirmation message is displayed.
5. Press Yes to confirm, or No to cancel.