User guide
Table Of Contents
- Software License Agreement
- Content
- Welcome
- IP Phone Keys
- Getting Started
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Creating a Speed Dial Key
- Editing Speed Dial Keys
- Do Not Disturb (DND) Key
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- Speeddial/Xfer
- Speeddial/Conf
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key
- Save Key
- Delete Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Star Codes
- Other Features
- Troubleshooting Solutions
- Why is my display blank?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
- Index
- Disclaimer
72 41-001522-00 REV00 – 04.2014
Handling Calls
When you are connected to a call, you can use the hard keys to place a call on hold, and programmable keys to transfer
calls or create conference calls.
Placing a Call on Hold
You can place an active call on hold by pressing the Hold key. When you place a call on hold, only your phone
can retrieve the call.
When a call is on hold, the icon displays on-hook as follows.
For on-hold calls, the timer displays as running and the Line and Message Waiting Indicator (MWI) LEDs flash.
The line/call appearance light begins to flash slowly and after a short time the phone beeps softly to remind you that
you still have a call on hold. The screen displays
Call held with the line number the call is held at the phone.
When on Hold
To let your caller know that they are still on hold, music plays softly (if this has been set up for your system). The call/line
appearance light for the line you are on flashes to indicate that you are still connected.
Automatic Hold
When juggling between calls, you do not have to press the key to go from one call to the next. The phone auto-
matically puts your current call on hold as soon as you press a new line/call appearance key. If you have more than one
call on hold, you can reconnect to a held call by pressing the line/call appearance key where that call is being held. Press
to disconnect the call.
Retrieving a Held Call
If you have more than 1 call on hold, you can scroll through the held call information by pressing 3 and 4 navigation
keys. To reconnect to a call press the line/call appearance key where that call is being held. If you press the call/line
appearance key again, you disconnect from the call.
IP Phone UI
1. Connect to the call (if not already connected).
2. Press the key.
Note:
If you are connected to another call, the phone does not beep to remind you that you still have a call on hold.
L1
01:25
Call held
L1
01:35
Martha Gold
555-1234