User guide
Table Of Contents
- Software License Agreement
- Content
- Welcome
- IP Phone Keys
- Getting Started
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Creating a Speed Dial Key
- Editing Speed Dial Keys
- Do Not Disturb (DND) Key
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- Speeddial/Xfer
- Speeddial/Conf
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key
- Save Key
- Delete Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Star Codes
- Other Features
- Troubleshooting Solutions
- Why is my display blank?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
- Index
- Disclaimer
Line Keys and Programmable Keys
64 41-001522-00 REV00 – 04.2014
Paging Key
You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol (RTP) stream to pre-
configured multicast address(es) without involving SIP signalling. You enter a multicast IP address(es) and a port number
for the Paging key, that when pressed, initiates an outgoing multicast RTP session. This is called Group Paging on the IP
phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams. You can specify
up to 5 listening multicast addresses at the path, Basic Settings > Preferences > Group Paging RTP Settings.
For more information about Group Paging and how it works, and to specify multicast addresses, see “Group RTP Paging”
on page 122.
Configuring a Paging Key
Aastra Web UI
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Paging.
4. In the Value field, enter a multicast IP address and a port number for the Paging key. When you press this key, the
phone initiates an outgoing multicast RTP session to the specified address using the specified port (e.g.
239.0.1.15:10000).
Note:
The Value field allows for one multicast address entry only.
5. To receive RTP steams for Group Paging, you must also configure the Paging Listen Addresses parameter at the path,
Basic Settings > Preferences > Group Paging RTP Settings. For more information about setting this parameter, see “Group
RTP Paging” on page 122.
6. Click Save Settings.