User guide
Table Of Contents
- Software License Agreement
- Content
- Welcome
- IP Phone Keys
- Getting Started
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Creating a Speed Dial Key
- Editing Speed Dial Keys
- Do Not Disturb (DND) Key
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- Speeddial/Xfer
- Speeddial/Conf
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key
- Save Key
- Delete Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Star Codes
- Other Features
- Troubleshooting Solutions
- Why is my display blank?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
- Index
- Disclaimer
Line Keys and Programmable Keys
50 41-001522-00 REV00 – 04.2014
Park/Pickup Keys
The 6863i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ call managers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key to park the call
• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the call
Administrators can configure the Park and Pickup keys for any line using the configuration files or the Aastra Web UI.
Configuring Park/Pickup Keys
Aastra Web UI
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Park.
Note:
The Value field should be configured by the Administrator.
4. Select from Key 1 through Key 3.
5. In the Type field, select Pickup.
Note:
The Value field should be configured by the Administrator.
6. Click Save Settings.
7. Click on Reset, then click Restart to restart the IP phone and apply the changes.