User guide
Table Of Contents
- Software License Agreement
- Content
- Welcome
- IP Phone Keys
- Getting Started
- Methods for Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line Keys and Programmable Keys
- Multiple Line and Call Appearance Keys
- Programmable Keys
- Creating a Speed Dial Key
- Editing Speed Dial Keys
- Do Not Disturb (DND) Key
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- Speeddial/Xfer
- Speeddial/Conf
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Services Key
- Phone Lock Key
- Paging Key
- Save Key
- Delete Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Star Codes
- Other Features
- Troubleshooting Solutions
- Why is my display blank?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
- Index
- Disclaimer
Line Keys and Programmable Keys
40 41-001522-00 REV00 – 04.2014
Press-and-Hold to Create a Speed Dial (applicable to programmable keys and keypad keys)
Pressing and holding down a programmable key or keypad key on the phone initiates a speed dial feature.
Note:
When creating a speed dial for a key on the IP phone, you must select a key that has no preassigned function (key must
be set to None).
IP Phone UI
1. Press a programmable key or a number key on the keypad for three seconds. A screen displays with the prompt, Enter
Number>.
2. Enter a phone number or extension to assign to that speed dial key.
The following example illustrates the screen display:
3. Press 4Save to save the number as a speed dial key.
By default, the phone automatically assigns the speed dial key to line 1 if available. To select a different line, use the
2 and 5 navigation keys.
4. Press 4Save to save the speed dial key to the line specified.
Speeddial
Enter Number>
333_
Cancel Save
Line:1
Change
Cancel Save