User guide

Using the Aastra 673xi / 675xi

Configuring a speed dialling destination

You can configure the number keys as speed dialling keys directly on your

Aastra 673xi / 675xi:

1. Press one of the number keys for a few seconds.

Aastra 6755i / 6757i: The display shows the Enter Number: menu card.

Aastra 6730i / 6731i and Aastra 6751i / 6753i: The display shows Speeddial->

Enter Number. Confirm with the down arrow key.

2. Enter the destination call number using the number keys. To correct a mistaken

number use the

Backspace

function key. Slide the cursor horizontally with the

left arrow key or right arrow key .

3. Use the navigation keys to move the cursor onto the Line: field and press

the

Change

softkey. This selects a trunk key which is to be linked with the

speed dialling.

4. Press the

Save

softkey resp. the right arrow key on the Aastra 6730i / 6731i

or on the Aastra 6751i / 6753i.

The speed dialling is now saved.

Note

You cannot remove speed dialling destinations saved to number keys (please

refer to the Deleting a Local Configuration starting on page 27).

Caller Lists

The administrator of the OpenCom 100 / Aastra 800 communications system can

configure “Missed calls” or “Accepted calls” function keys (seeFunction Keys Ref-

erence starting on page 24). Use these function keys to access the caller lists

managed on the OpenCom 100 / Aastra 800 communications system. The LED

indicator next to the “Missed calls” function key additionally blinks when the caller

list contains new entries.

1. Press the function key with the caller list function.

The caller list appears.

2. Use the navigation keys to go to the desired entry.

3. Press the

Dial out

softkey to call the selected entry.