User`s guide

Configuring Dial Plan Settings
4-42 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
5The “Phone A Number” is the dial plan prefix of 6010, used for dialing over the FXO Port A. This
field is read-only. For more information about this prefix, see the Dial Plan Table on page 4-40.
6 In the “Phone A Hotline” field, select the extension or phone number you want to use to dial out over
the FXO Port A as a hotline. If the phone is set to use this line, when a User picks up the handset to
dial, there is no dial tone. Valid values are any configured phone extension in your network or None.
7The “Phone B Number” is the dial plan prefix of 6011, used for dialing over the FXO Port B. This field
is read-only. For more information about this prefix, see the Dial Plan Table on page 4-40.
8 In the “Phone B Hotline” field, select the extension or phone number you want to use to dial out over
the FXO Port B as a hotline. If the phone is set to use this line, when a User picks up the handset to
dial, there is no dial tone. Valid values are any configured phone extension in your network or None.
9The “FXO Line Prefix” field is the dial plan prefix of 9, used to dial out over an FXO line for external
PSTN calls. This field is read-only. For more information about this prefix, see the Dial Plan Table on
page 4-40.
10 The “SIP Trunk Prefix” field is the dial plan prefix of 8, used to dial out over an external SIP trunk.
This field is read-only. For more information about this prefix, see the Dial Plan Table on page 4-40.
For more information about the SIP Trunk Prefix”, see “SIP Trunking” on page 4-76.
11 The “SIP Trunk Mode” allows you to select whether a user dials out over a single SIP trunk or
multiple SIP trunks. Valid values are:
•Single
•Multiple
If this field is set to “Single”, a user can dial 8+number. If set to “Multiple”, a user can dial
8+index+number.
For more information about the SIP Trunk Mode feature, see “Single and Multiple SIP Trunks” on
page 4-84.
12 The “AastraLink Trunk Prefix” field is the dial plan prefix of 7, used to dial out over an AastraLink
trunk. This field is read-only. For more information about this prefix, see the Dial Plan Table on
page 4-40.
AastraLink Web UI
Step Action