User`s guide

Configuring Network Settings
41-001190-02 Rev. 01, Rel. 1.2 4-25
Configuring AastraLink Pro 160 System and Network Parameters
4 DHCP is enabled by default. To disable DHCP, click on “Use DHCP” to uncheck the box.
Note: If you disable DHCP, then you must statically configure the following networking parameters:
• IP Address: Set to a valid IP address.
• Subnet Mask: Set to a valid Subnet Mask address.
• Gateway: Set to a valid Gateway IP address.
• DNS Server 1: Set to the IP address of DNS server 1.
• DNS Server 2: Set to the IP address of DNS server 2.
5 Click <Save> to save your changes.
Note: You must reboot your AastraLink Pro 160 in order for these network parameter changes to be
implemented.
AastraLink Web UI
Step Action