User guide

Chapter 5, Phone Features
54 Aastra – 2736-007
Step
Action
Result
10.
Wait for the new party to answer.
You can consult with the new party
first before adding them to the
conference.
 The original party is still on hold
and the lamp is flashing.
 The second line lamp is steady,
indicating the new party is not yet
been added to the conference.
11.
Press the Conf softkey again.
 The conference is established and
the second line lamp turns off.
 The original line lamp is on steady.
 A list of the other two parties in the
conference displays on the
originator’s screen.
L2 John Smith
1. 2394
2. 2395
04:35
Drop
Conf
Xfer More
If you do not wish to add the third party to the conference:
1.
Press the Cancel softkey while the
third party’s phone is ringing.
2.
Press the Pickup softkey.
You are reconnected to the original
party.
Release a Conferenced Party
Step
Action
1.
Use or to point to the party to
drop.
You are still connected to the other
party.
2.
Press the Drop softkey.
If you disconnect from the conference,
the other two parties will also
disconnect.