User guide

6755i IP Phone User Guide for SPN
Aastra - 2736-007 17
 Line/call appearance assignments on these keys are L5 – L9. If you want to originate
a call from one of these keys, you must choose the line manually because your
preferred line is L1.
 If both the line and call appearance are busy, an incoming call follows the call
forward busy destination. If there is no call forward/busy destination assigned, the
caller hears busy tone.
 If a call rings in when you are already on a call, the original call is automatically
placed on hold when you answer the new call.
State-based Softkeys as Line/Call Appearances
The state-based softkeys on the LCD display can also be programmed as line and call
appearances. The following applies to these keys:
 Both the main line appearance and the supporting call appearance display on the
screen on the softkeys where they have been assigned. Status icons also display next
to the directory number for these keys.
 The lamps associated with the line or call appearance provide status.
 The line appearance and call appearance are usually assigned to adjacent keys.
 Line/call appearance assignments on these keys are L5 – L9. If you want to originate
a call from one of these keys, you must choose the line manually because your
preferred line is L1.
 Either one of the keys can be used to place a call from that directory number. The
destination will always display the directory number of the line appearance as the
originating directory number.
 If both the line and call appearance are busy, an incoming call follows the call
forward busy destination. If there is no call forward/busy destination assigned, the
caller hears busy tone.
 State-based softkeys on the LCD display assigned as line/call appearances will move
to the subsequent screens along with the other feature softkeys according to the state
the phone is in.
 If call rings in on line/call appearance softkeys that do not display on the first screen
of the phone, you can go off-hook and the call is automatically answered. If you want
to view the actual line appearance softkey, you must use the More softkey to go to
the screen where the softkeys are displayed.
The following illustrates the top hard keys and the bottom state-based softkeys as
line/call appearances in the idle state and the connected state.