User guide

Chapter 2, Getting Started
10 Aastra – 2736-007
Key
Description
Optional
Expansion
Modules
The M670i or M675i Expansion Module(s) provide an additional 36
softkeys on each M670i Expansion Module, and up to 60 softkeys on
each M675i Expansion Module. (The 6755i IP Phone allows up to 3
expansion modules on each phone).
Programmable Keys
The 6755i has the following programmable keys:
 6 Top Hard Keys – Programmable hard keys that support up to 6 programmable
functions, with corresponding status lamps for line appearances. There is a key card
provided with the phone that provides label identification for these keys.
 6 Bottom Softkeys – Context-sensitive state-based softkeys that support up to 20
programmable functions, with corresponding status lamps for line appearances. See
Softkey Display below.
Features and Key Labels
Programmable hard keys and softkeys are configured by the system administrator
according to the requirements of your organization. You may or may not have some of
the features listed in the table below.
Key Name
Key Label
(10-character
display)
Description
Line/Call
Appearances
Directory Number
Line/call appearances.
Conference
Conf
Establishes a 3-way conference.
Transfer
Xfer
Transfers a call to another party.
Call Forward
Forward
Forwards your calls to another phone.
Call Mark
Call Mark
Call Park
Call Park
Parks a call.
Call Pickup
Call Pkup
Picks up a call ringing at another phone.
Do Not Disturb
DND
Places the phone in the Do Not Disturb
state and incoming calls go directory to
your pre-defined call forward/busy
destination, usually your voicemail.
Empty
No label – An
assigned blank slot
in the display.
The softkey is configured to force a blank
entry on the IP phone display for a specific
softkey.