User guide

6755i IP Phone User Guide for SPN
Aastra - 2736-007 111
Step
Action
Result
2.
Enter the directory number.
NOTE:
If the directory number is less than 5
digits, you must enter the # key after
entering the digits.
You hear a ZIP tone that prompts you
for the Personal ID (PIN) of the line.
3.
Enter the PIN number.
The maximum number of digits in the
PIN is 8 digits. If you have less than 8
digits, enter the # key after entering the
digits.
You hear a ZIP tone that prompts you
for the new Multi-Ring status.
4.
Enter a single digit as follows:
 0 to turn off (disable) Multi-Ring
on the line.
Or
 1 to turn on (enable) Multi-Ring on
the line.
You hear a ZIP-ZIP tone that confirms
the change.
The Multi-Ring button lamps on the
phone(s) are updated accordingly.
Multi-Ring Call Answer Confirmation
The system administrator may configure the Multi-Ring feature on your phone to require
you to give a confirmation before the call is connected.
You will hear one of the two following types of prompts that has been configured for
your organization:
 A prompt asking you to press any DTMF digit to accept the call.
 A prompt asking you to press any DTMF digit to do one of the following:
– Accept the call, where the call is immediately connected or,
– Immediately forward the call to the Call Forward-Busy destination of the line. If
CFB is not configured the caller will hear the busy tone.
A pause of up to 15 seconds allows you time to confirm.
If you hang up or do not press a digit within the maximum time period, the call will then
follows the assigned call forward path.
If the call ringing on the line is not answered by one of the Multi-Ring numbers, the call
is handled just like any other unanswered call and follows the assigned call forward path.