User guide

6755i IP Phone User Guide for SPN
Aastra - 2736-007 109
Chapter 10
Multi-Ring
Overview
When a call arrives at a line with Multi-Ring activated, the Pointspan system places one
or more Multi-Ring calls if a line is configured with the Multi-Ring feature.
There is also an option provided to allow you to accept the call by pressing any DTMF
digit on the phone including # and *. The call is connected only when you confirm the
answer.
Multi-Ring is turned on or off on lines configured with Multi-Ring as follows:
 Locally at the phone.
 Remotely from another Pointspan phone.
 Remotely from home via a Pointspan trunk.
Multi-Ring Status
The Multi-Ring softkey displays the current enabled/disabled status, and can be used to
change that status.
The lamp on the Multi-Ring softkey reflects the current status of Multi-Ring on the
currently selected line:
 Lamp ON – Multi-Ring is enabled.
 Lamp OFF – Multi-Ring is disabled and the system will not attempt to call any other
number defined on the line.
Bridged Line Appearance Lines
When you press the Multi-Ring softkey to enable or disable Multi-Ring on the currently
selected line, the lamp immediately changes on all ITEs or SIP stations sharing that line
to reflect the change in Multi-Ring status.
Multi-Ring on more than One Line
When your phone has two or more lines configured with Multi-Ring, the lamp on the
Multi-Ring button reflects the combined status of Multi-Ring on ALL lines on the SIP
station as follows:
 When the lamp is on steady, Multi-Ring is enabled on at least one line of the SIP
station.
 When the lamp is off, Multi-Ring is disabled on all lines of the SIP station.