System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Examples
Aastra Proprietary Information Page 2-51
For main line B, converters 1 and 2 of the modules are connected to the
corresponding ports (64 kbit/s channel).
In node 1, subscriber A-1 is connected to a module configured for a
2 x 4-subscriber conference. Node 1 is used as Central Station for
conference A.
In nodes 3 and 6, the subscribers A-3 and A-6 of conference A are
connected. Here the module is configured for an 8-subscriber conference.
In node 5, the subscribers A-4 and A-5 are connected to a module
configured for the 2x4-subscriber conference mode.
Sub-line - Conference A
Subscriber A-2 in node 4 is transparently routed in channel 11 [A] via
node 2 to node 3. There it is connected to conference A via a converter.
Conference B subscribers:
• Conference subscriber B-1
• Conference subscriber B-2
• Conference subscriber B-3
• Conference subscriber B-4
Main line - Conference B
The main line of conference B starts in node 1 and is routed in
channel 20 [B] via nodes 2, 3, 5 and 6 to node 4. In nodes 2, 3 and 6,
channel 20 [B] is switched through transparently. Subscribers B-1 to B-4 are
connected along this main line.
For main line B, converters 5 and 6 of the modules are connected to the
corresponding ports.
In node 1, subscriber B-1 is connected to a module configured for the
2x4-subscriber conference mode. Node 1 is used as Central Station for
conference B.
In node 5, subscribers B-3 and B-4 are connected to a module configured
for the 2x4-subscriber conference mode.
In node 4, subscriber B-2 is connected to a converter of a module
configured for the 2x4-subscriber conference mode.