System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Ethernet interface
Aastra Proprietary Information Page 8-17
8.5.2 Ethernet interface
An Ethernet interface for connecting the NMS is provided by the Ethernet
Adapter sub-module or - with the SDH expansion - by the CU-E (Central
Unit Expansion) sub-module.
For using the Ethernet interface, the Central Unit must therefore be
equipped with an Ethernet Adapter (AN00114784, 62.7040.303.00-A001)
or - with the SDH expansion - with the CU-E sub-module
(05HBA00006AAX).
For this purpose, the connecting cable type Ethernet is required.
This connecting cable is available in two different versions with different
lengths.
Note: A crossed cable is required to set up a direct connection to
a PC.
_
Tab. 8.J: Ethernet connecting cable
VERSION IDENT. NO. LENGTH
Conn. Cable Ethernet 1301679-0019 5 m
Conn. Cable Ethernet 1301680-0016 10 m
RJ45-8pin, shielded
RJ45-8pin, shielded