System information

FCD 901 48

Issue R2A, 07.2009

XMP1 Release 5.5 System Description

SOX Connection

Page 8-16 Proprietary Information Aastra

8.5 SOX Connection

The connection of SOX to the network can be set up via a F-interface or

Ethernet interface (optional).

8.5.1 F-interface

The connection to the SOX computer is established via connector X3

(F-interface) of the Central Unit using a connecting cable.

The connecting cable to be used for this purpose is V.24/V.28.

This connecting cable is available in two different versions with different

lengths.

Central Unit redundancy

For Central Unit redundancy, the Y-connecting cable type V.24/V.28 must be

used.

This connecting cable is available with a length of 10 m.

Tab. 8.H: ZT <-> RS1 connecting cable

VERSION IDENT NO. LENGTH

Conn. Cable, V.24/V.28 1301681-0015 5 m

Conn. Cable, V.24/V.28 1301682-0014 10 m

Tab. 8.I: Y-connecting cable V.24/V.28

VERSION IDENT. NO. LENGTH

Y-Conn. Cable, V.24/V.28; 10m 1301683-0013 10 m

D-SUB-F09/L

D-SUB-F09 M3/L KPL

D-SUB-F09/L

D-SUB-F09 M3/L KPL