System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Ethernet expansion
Page 8-10 Proprietary Information Aastra
8.2.9 Ethernet expansion
The modules required for the Ethernet expansion of the XMP1 system are
listed in the following table.
DESIGNATION IDENT. NO. NOTE
EoSCU (Ethernet over SDH Core Unit)
05HAN00367AAV -
CU-E (Central Unit Expansion) with IB
cable
05HBA00006AAX
Expansion module for
Central Units
version V3.0 and higher
Ethernet SFP
100Base TX elektrical 2401292-0013 RJ45, 100 m
100Base FX 1400800-0011 1300 nm, 0-13 dB/2 km
STM-1 S1.1 100Base LX10 1400729-0027 1300 nm, 0-10 dB/10 km
STM-1 SFPs optical
STM-1 SFP S1.1 SH 1300 1400729-0027
STM-1 SFP L1.1 LH 1300 1400744-0051
STM-1 SFP L1.2 LH 1550 1400744-0044
STM-4 SFPs optical
STM-4 SFP S4.1 SH 1300 1400744-0010
STM-4 SFP L4.1 LH 1300 1400744-0028
STM-4 SFP L4.2 LH 1550 1400744-0036
STM-1 SFP elektrical
STM-1 SFP EL 9500001-0017
Front panel
SCU-FP (SDH Core Unit-Front Panel)
05HBA00013AAG
Connecting panel for two
EoSCUs in redundancy
configurations.
Note:
Only the SFPs listed in the table may be used in the XMP1 system.