System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Mechanical Design, Equipment and Cabling
Aastra Proprietary Information Page 8-1
Chapter 8
Mechanical Design, Equipment and Cabling
8.1 Design
Three different types of XMP1 subracks are available for mounting plug-in
modules. They differ from each other with respect to their number of card
slots.
• XMP1 Subrack (16), see Section 8.1.1, XMP1 Subrack (16), XMP1
Subrack (8)
• XMP1 Subrack (8), see Section 8.1.1, XMP1 Subrack (16), XMP1
Subrack (8)
• XMP1 Subrack (16/32), Section 8.1.2, XMP1 Subrack (16/32)
8.1.1 XMP1 Subrack (16), XMP1 Subrack (8)
The 19" XMP1 subrack with 7 height units (HU) can be installed both in 19"
and ETS racks or cabinets.
XMP1 Subrack type (16) offers 16 identical card slots, while XMP1 subrack
type (8) provides eight card slots for plug-in modules. The individual
modules are interconnected via the backplane.
Note: For installation in ETS racks, the flanges must be turned.
Note: Never operate the XMP1 system without its front panel
mounted.
The following figure shows an XMP1 subrack (16) with its front panel
mounted.
DESIGNATION PART NO. NOTE
XMP1 Subrack (8) BFD 101 028/1
with front panel,
Color RAL5007 brilliant blue
XMP1 Subrack (16) BFD 101 029/1
XMP1 Subrack (16/32) BFD 101 030/1