System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Rerouting at Alarms
Page 6-82 Proprietary Information Aastra
Depending on the result of the analysis all Network elements affected by the
rerouting will be locked for other users. Afterwards the configuration of the
changed
network elements will be transmitted as broadcast to the network
and activated. Then the configuration is stored to the database. The lock of
the network elements concerned is reset again.
In case of a failure e.g. the configuration cannot be loaded to the network
and activated a reload of the database will be performed. Thus the old
configuration is still available.
With a multi user system the "Rerouting on Alarms" function can also be
performed manually. This will be done in the same way as for a single user
system.
Time-dependent Rerouting on Alarms
Time-dependent "Rerouting on Alarms" of connections can also be
configured. You can define whether alarm rerouting shall be performed or
not.
9 am
11 pm
Reroute Circuits with Alarms
12
2 pm
Deny: Reroute Circuits with Alarms
Schedule A:
Schedule B:
9 am 11 pm
Reroute Circuits with Alarms
Result:
Reroute Circuits with Alarms
Deny:
12
2 pm
Reroute Circuits with Alarms