System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Alarm Management
Page 6-58 Proprietary Information Aastra
6.8 Alarm Management
The Alarm Management fulfills the following functions:
• Network-wide alarm management
• Display of spontaneous alarms in the network
• Display of alarm statuses of sub-networks or layers
• Alarm status request when the node goes online
• Recording of alarms, signal concentrator statuses, special system
statuses and user activities
• Network reactions:
Control of signal concentrator outputs due to signal concentrator inputs
or alarms
• Network-wide request of all alarms (request current network status)
The alarms of the XMP1 network are displayed both in the Graphical View
and in the alarm list.
The alarms of all network elements (nodes) available in a network are
included in the alarm list of the SOX Network Manager. All network element
alarms, module alarms, sub-address alarms and interface alarms are
displayed.
The alarm list of the LCT SOX includes all alarms of the current network
element, all cards, sub-addresses and interfaces. In addition, the signal
inputs of the signal concentrators available are displayed.
Alarm display in the Graphical View
In the Graphical View, the alarm status of a network element is indicated by
the icons or symbols displayed in different colours. The respective colour
represents a combination of all alarms that have occurred in the
corresponding network element.
Alarm view
Urgent alarm
minor alarm
( not urgent )
Acknowledged
urgent alarm
Location ok, not
acknowledged