System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Firmware
Page 6-46 Proprietary Information Aastra
6.6.2 Firmware
The "Firmware" mask displays information regarding the firmware loaded in
the node. Here a distinction is made between the "active" and "passive"
firmware. The firmware is identified by its firmware ID.
Example: V37003c4bNZa
In this mask, you can switch over between the "active" and "passive"
firmware.
6.6.3 CoChannel Radio
If the ports of a node are used to transmit co-channel radio data, the ports
must be aligned. This alignment is performed using the "Co-Channel Radio"
mask.
Only fully operational nodes can be aligned. Whenever a node displays a
fault, first eliminate the cause before you start up the alignment process.