System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Connection via F-interface (RS232)
Aastra Proprietary Information Page 6-37
Remote access via a remote PC using XMPIpDrv
In the example described below, the SOX is connected to a XMP1 node via
a remote PC.
The SOX and remote PC are interconnected via a LAN.
The remote PC is connected via a COM port to the RS232 interface of the
XMP1 node.
The remote PC must be loaded with the XMPIpDrv software and started up.
In addition, the remote PC must be assigned an Ethernet address.
In the SOX, an Access Point must be defined. In this example, this is the
remote PC. The following attributes must be assigned:
Host name: Enter the IP address of the remote PC.
IP port number: Enter "direct IP node".
Priority: Enter the priority if several Access Points are used for
one Area.
RS232
Operator
Terminal
LAN
XMP1
XMP1
XMP1
XMP1
XMP1
XMP1
LMT
RS232 -> X3
Central Unit
- XMPIpDrv
- Ethernet address