System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Installation
Aastra Proprietary Information Page 6-25
6.2.2.8 Installation
The SOX Setup copies the files required for the Client, Server and
Single-User Version into the installation directory. This directory should
contain three *.exe files:
SoxKernelService.exe runs as Windows Service. It is started as Windows
Service and sets up a connection to the XMP1 network immediately, i.e.
before a user logs in. It continues to run even after the last user has logged
out.
Since this program does not have a User Interface, it retrieves its
parameters from configuration files or from the command line parameters.
Possible alarm messages will appear in the Windows Event Display.
Parameterization via the configuration file must be separately executed for
each installation.
SoxKernelConsole.exe has the same command line parameters and a
configuration file similar to that of SoXKernelService.exe. Before
SoxKernelService.exe is installed as Windows Service, the settings of the
configuration files or command line parameters can be checked by means
of SoXKernelConsole.exe.
SoxUserInterface.exe provides the User Interface of the SOX Client.
Using the -Client option, the SOX single-user NMS is started as SOX Client.
Using the -LCT option, the SOX single-user NMS is started as SOX LCT.
For detailed information, please refer to the installation instructions.
Aastra.Sox.SoxKernelService.exe
SoX Server as Windows Service
– must be installed as Windows Service using the
installutil.exe auxiliary program before being used.
Aastra.Sox.SoxKernelConsole.exe
SoX Server as Console Application
– with the same command line parameters and a
configuration file similar to SoxKernelService.exe.
Aastra.Sox.SoxUserInterface.exe
SoX Single User NMS,
with the –Client option: SoX Client,
with –LCT option: SoX LCT