System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Performance data
Aastra Proprietary Information Page 5-15
5.8 Performance data
The following diagram shows the position of performance measuring points
for the LT, NT and repeaters 1 to 8.
Definition of 15-min/24-h SDSL performance counters
Performance counter SDSL and repeater
Performance counter E1
The E1 performance counters are used for the external E1 interfaces.
Table 5.B: Performance counter SDSL and repeater
SHDSL PI SHDSL REP DESCRIPTION
COUNTER NAME
TMP TMP Time of measurement period.
neES neES Count of Errored Seconds (ES) in this endpoint.
neSES eSES Count of Severely Errored Seconds (SES) in this endpoint.
neUS neUS Count of Unavailable Seconds (UAS) in this endpoint.
OI -
Count of Outage Intensity events in this endpoint: State changes
Available<->Unavailable
CRCA CRCA Count of CRC anomalies in this endpoint.
LOSWS LOSWS Count of Loss of Sync Word (LOSW) Seconds in this endpoint.
SEGA Count of Segment anomalies in this endpoint.
LOS Count of Loss Of Signal Seconds in this endpoint.
E1 PERFORMANCE COUNTER DESCRIPTION
TMP Time of measurement period
neUS near end Unavailable Seconds (UAS)
neES near end Errored Seconds (ES)
neSES near end Severely Errored Seconds (SES)
neBBE near end Background Block Errors
LT mode NT mode
Repeater 1 Repeater 2 Repeater 3 Repeater 8
E1 E1SDSL SDSL
SHDSL PI SHDSL PI
NS CS NS CS NS CS NS CS
D1CTP NS D1CTP NS