System information

FCD 901 48
Issue R2A, 07.2009
XMP1 Release 5.5 System Description
Alarms
Aastra Proprietary Information Page 5-13
5.7 Alarms
The following alarms are supported for signalling operating and error
statuses:
• SDSL link alarms
• E1 link alarms
• Repeater alarms
5.7.1 SDSL link alarms
The following alarms (alarm no. 608 to 623 in the operator software) are
supported for the SDSL link:
• Link: Configuration error
• Link: Wrong number of repeaters
• Link: Remote loop closed
• Link: No more PM resources available
• Link: LOS (Loss of Signal)
• Link: LOSWF (Loss Of Signal Word)
• Link: No Peer Detected
• Link: NT not identified
• Link: BER -5/6
•Link: BER -3
• Link: Segment error
• Link: SNR margin alarm
• Link: DiagnosticMode has been enabled by the user
5.7.2 E1 link alarms
The following E1 link alarms (alarm no. 624 to 631 in the operator software)
are supported:
LT mode NT mode
Repeater 1 Repeater 2 Repeater 3 Repeater 8
E1 E1SDSL SDSL
SDSL SDSL
Repeater alarms
Rep. x; with x= 1 to 8
SDSL Link alarms
E1 Link alarms