Specifications

Aastra July 2014 PA-001011-03-04
90
3.5 ImageScreen Object (55i/57i/57iCT/6735i/6737i/6867i/6739i)
The ImageScreen object can be used to display single image (bitmap for the
55i/57i/57iCT/6735i/6737i, jpeg or png file for 6867i and 6739i).
The user can specify where the image should be placed by setting horizontal and vertical alignment
of the upper left hand corner, along with the height and width of the image.
3.5.1 Implementation (55i/57i/57iCT/6735i/6737i)
The image itself is specified as a series of hexadecimal characters. See chapter 4.2.1.1 for more
details.
Note: With firmware 3.3.1 the image size is limited to 144x40 pixels.
Object native interaction
 Done Redisplays the previous XML object present in the phone browser.
Object default Softkeys (softkey phones)
Position
Label
Description
URIs
6
Done
Redisplays the previous XML object present
in the phone browser.
SoftKey:Exit
Note:
 the Left Arrow key default interaction is disabled if the LockIn tag is set to “yes”.
 the Left Arrow key default interaction can be modified using the cancelAction tag
on a non-softkey phone.
 If the LockIn tag is set to “yes” and the cancelAction tag is configured, pressing
the Left Arrow key triggers the configured cancelAction.
 the Right arrow key default interaction can be modified using the doneAction tag on
a non-softkey phone.
 The up, down, left and right arrow key default interactions can be overridden using
the scrollUp, scrollDown, scrollLeft and scrollRight tags.
3.5.2 Implementation (6867i)
For the 6867ii, the image is either a 24/32 bit depth “png” or a “jpeg” file located on a server and
which can be downloaded by the phone using TFTP, FTP, HTTP or HTTPS. See chapter 4.2.1.2
for more details.
Three image sizes are supported:
 Up to 320x180 pixels (mode=regular or extended).
 Up to 320x240 pixels (mode=fullscreen). In that case, the softkeys are not displayed.