User guide

Line Keys and Softkeys
41-001452-05 REV01 – 04.2014 47
In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for
that state.
Key Display Behavior
On the 6737i IP Phone, you can configure up to 20 functions on the bottom softkeys. If you have no softkeys configured on
the IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automati-
cally appear in the first available position on the LCD display.
For example, if the bottom softkeys 1 through 20 are set to "None", and you set softkey 12 as the following:
Type: speeddial
Label: LAB
Value: 3456
after saving the settings, the "LAB" label actually appears in position 1 of the LCD.
A softkey function of "None" does not display on the idle screen at all.
Speeddial/Xfer Idle, Connected, Incoming, Outgoing, Busy
Speeddial/Conf Idle, Connected, Incoming, Outgoing, Busy
Directory Idle, Connected, Incoming, Outgoing, Busy
Callers List Idle, Connected, Incoming, Outgoing, Busy
Redial Idle, Connected, Incoming, Outgoing, Busy
Conference Idle, Connected, Incoming, Outgoing, Busy
Transfer Idle, Connected, Incoming, Outgoing, Busy
Intercom Idle, Connected, Incoming, Outgoing, Busy
Services Idle, Connected, Incoming, Outgoing, Busy
Phone Lock All states disabled.
Paging All states disabled.
Empty Idle, Connected, Incoming, Outgoing, Busy
Softkey Type Default States