User guide

Customizing Your Phone
41-001452-05 REV01 – 04.2014 29
Set Time Zone
Daylight Savings Time
Set Time Servers
With a valid time server enabled your IP phone will synchronize the time displayed with the specified configuration server.
The phone will use the time from Time Server 1 unless it is not configured or unavailable, in which case it will move on to
Time Server 2, and if necessary Time Server 3
7. Select a date format from the list of options. Default is WWW MMM DD. Valid values are:
• WWW MMM DD (default)
• DD-MMM-YY
• YYYY-MM-DD
• DD/MM/YYYY
• DD/MM/YY
• DD-MM-YY
• MM/DD/YY
• MMM DD
• DD MMM YYYY
• WWW DD MMM
• DD MMM
• DD.MM.YYYY
8. Press Done to save the Date Format.
1. Select Preferences.
2. Select Time and Date.
3. Select Time Zone.
A list of Time Zones display for different areas of the world.
4. Select a Time Zone that applies to your area.
The default Time Zone is US-Eastern.
Note:
For a list of the Time Zones values available on the IP Phone, see ‘Appendix A - Time Zone Codes.”
5. Press Done to save the Time Zone setting.
1. Select Preferences.
2. Select Daylight Savings.
3. Select a Daylight Savings time from the list of options.
Default is Automatic. Valid values are:
• OFF
• 30 min summertime
• 1h summertime
• Automatic (Default)
4. Press Done to save the Daylight Savings value you selected.
1. Select Preferences.
2. Select Time and Date.
3. Select from Time Server 1, Time Server 2, or Time Server 3.